SIDE-BY-SIDE RIFLE

• New scallopped 28 ga. round action
• Available Calibers: 9,3 x 74 mm R – 8 x 57 mm JRS – 7 x 57 mm R – 6,5 x 57 mm R – 30-30 Win
• Average weight: 3 kg

New, round profile narrow (28 ga.) Serie 3 receiver. The barrels are set closer to each other and the detonating has been reshaped and refined. New “Royal” style deep cut engraving wrapped around the receiver, with new game scenes on action sides and bottom.

Double parallel underlugs on the 55 cm (22 in.) barrels, reshaped and fitted out with a new “battue” rib sight and a streamlined foresight. AAAA grade walnut pistol grip stock with English-style round cheekpiece and engraved steel grip cap. Matching walnut buttplate and forend with a fully inlaid smaller lever lock.

Hand-rubbed oil finish, hand cut checkering. Double-trigger “Blitz”-type battery, short trigger guard. Comes in an ABS molded case equipped with coded locks

• Available Calibers: 9,3 x 74 mm R – 8 x 57 mm JRS – 7 x 65 mm R – 30 R Blaser option – 30.06
• Average weight: 3,2 kg

Inlaid scallopped receiver. “Royal” style deep cut engraving the receiver, with game scenes on action sides and bottom.

Double parallel underlugs on the 55 cm (22 in.) barrels (also available in 600 mm (24 in.) length), reshaped and fitted out with a new “battue” luminescent rib rear sight and an adjustable foresight. Quarter rib is pre-machined for scope sight mounts.

AAA fancy grade walnut pistol grip stock with English-style cheekpiece on ejector guns (AA fancy grade on extractor versions). Matching checkered walnut buttplate and forend. Hand-rubbed oil finish, hand cut checkering. Double-trigger “Blitz”-type battery. Comes in an ABS molded case equipped with coded locks.

• Scalloped receiver with mustaches reinforcements. New deep engraving with large scrolls for the ornamentals and wild boar or roebuck trophy engraved underneath the receiver. Pistol grip stock with English style cheekpiece in AA Fancy walnut. Hand- rubbed oil finish hand cut checkering
• Available Calibers: 8 x 57 mm JRS – 9,3 x 74 mm R 30.06 – 30R Blaser – 308 Win
• Average weight: 3,1 kg

In a conventional double rifle, barrel convergence can only be obtained by a complex soldering operation that requires highly skilled labour and mandates the use of only one load. With very few exceptions, this means that going to another load requires re-regulation of the barrels, which implies returning the gun to the factory for intricate polishing and blueing. The left-hand barrel is fixed. No significant force needs to be applied to it.

An adjustable block allows for simple and easy regulation by an easy change in the pressure it exerts on the free-floated right-hand barrel, equipped with a guiding ring. The barrel band is also fully floated. This unique barrel design has been patented. A confirmed professional gunsmith will find that fast, non-invasive adjustments can be conducted easily without complex tooling whenever there is a need for different ammunition or loadings. When installing optical sights, there is no longer any chance that the point of impact is changed because of the weight or constraints coming from the mount or the weight of the optics.

This unique regulation system is offered for the first time in a classic side-by-side double rifle. Whether you fire four, six or eight cartridges in quick succession or just send one or two bullets on their way to your game, convergence and regulation stay assured in most hunting situations and with most quality cartridges. The regulation adjustment block is not visible from the outside. The new X4 double rifle features the unique Progress receiver’s usual highly refined, hand chased detailing of the detonating typical of Chapuis Armes, now featuring reinforcing ribs that stem directly from the Chapuis Armes tradition. Finely polished double triggers are present. The pistol-grip stock features a conservatively contoured traditional cheekpiece and dimensions set to emphasize the perfect balance and instantaneous target acquisition so important in a working hunting gun. Weight is approximately 6 lbs or 3.1 kilos depending on walnut density and calibre. An adjustable front sight is installed on top of a contoured, streamlined ramp. The rear sight is a fiber optic enhanced leaf dovetailed in a quarter rib that is factory prepared to accept various bases for optics installation. The X4 side-by-side double rifle is fitted with either automatic ejectors or manual extractors.

• New scallopped 28 ga. round action
• Available Calibers: 9,3 x 74 mm R – 8 x 57 mm JRS – 7 x 57 mm R – 6,5 x 57 mm R – 30-30 Win
• Average weight: 3 kg

New, round profile narrow (28 ga.) Serie 3 receiver. The barrels are set closer to each other and the detonating has been reshaped and refined.

New “Royal” style deep cut engraving wrapped around the receiver, with new game scenes on action sides and bottom. Double parallel underlugs on the 55 cm (22 in.) barrels, reshaped and fitted out with a new “battue” rib sight and a streamlined foresight.

AAAA grade walnut pistol grip stock with English-style round cheekpiece and engraved steel grip cap. Matching walnut buttplate and forend with a fully inlaid smaller lever lock. Hand-rubbed oil finish, hand cut checkering. Double-trigger “Blitz”-type battery, short trigger guard. Comes in an ABS molded case equipped with coded locks.

• New 28 ga. sized round body action, scalloped for tighter wood-to-metal fit
• All barrels 550 mm (22 in.) in length
• Available Calibers: 9,3 x 74 mm R – 8 x 57 mm JRS – 7 x 57 mm R – 6,5 x 57 mm R – 30-30 Win
• Average weight: 3 kg

New round profile narrow (28 ga.) Serie 3 receiver. The barrels and firing pins are set closer to each other and the detonating has been reshaped and refined. Barrels with double parallel underlugs, new barrel contour, 550 mm (22 in.) length, fitted out with a new “battue” rib, luminescent rear sight and a streamlined foresight. Fully hand-engraved in deep-cut designs wrapping around the receiver,

with “al bulino” game scenes on bottom of the action, signed by a Master Engraver. Double-trigger “Blitz”-type battery. Pistol grip stock with german cheekpiece carved out of AAAAA luxury

walnut hand fitted with skeletonised, engraved steel buttplate, walnut spacer. Hand-rubbed oil finish, hand-cut “gunpowder” checkering wrapping around the entire pistol grip. Comes in a New Prestige Chapuis Armes gun case.

• New 28 ga. sized round body action, scalloped for tighter wood-to-metal fit
• All barrels 550 mm (22 in.) in length
• Available Calibers: 9,3 x 74 mm R – 8 x 57 mm JRS – 7 x 57 mm R – 6,5 x 57 mm R – 30-30 Win
• Average weight: 3 kg

New round profile narrow (28 ga.) Serie 3 receiver. The barrels and firing pins are set closer to each other and the detonating has been reshaped and refined.

Barrels with double parallel underlugs, new barrel contour, 550 mm (22 in.) length, fitted out with a new “battue” rib, luminescent rear sight and a streamlined foresight. Fully hand-engraved in deep-cut designs wrapping around the receiver, with “al bulino” game scenes on bottom of the action, signed by a Master Engraver. Double-trigger “Blitz”-type battery. Pistol grip stock with german cheekpiece carved out of AAAAA luxury walnut hand fitted with skeletonised, engraved steel buttplate, walnut spacer.

Hand-rubbed oil finish, hand-cut “gunpowder” checkering wrapping around the entire pistol grip. Comes in a New Prestige Chapuis Armes gun case.

• Available Calibers: 9,3 x 74 mm R – 8 x 57 mm JRS – 7 x 65 mm R – 30R Blaser – 30.06
• Average weight: 3,3 kg

Hand-contoured and detailed action fitted with sideplates, palms and round detonating. Double parallel locking underlugs, “Blitz” type double-trigger battery. 600 mm (24 in.) barrels (550 mm/22 in. on request) with a quarter rib rear sight base prepared for scope sight installation. Illuminated rear sight, adjustable foresight. Flush engraved forend locking lever.

Pistol grip stock with undercut german cheekpiece in luxury AAAAAA walnut, hand-rubbed oil finish, elongated trigger plate with raised border engraved trigger bow, engraved steel pistol grip cap. Hand-checkered rosewood butt plate. Comes in a New Prestige Chapuis Armes gun case.

• Available Calibers: 375 H & H – 375 Flanged – 470 NE – 450.400 NE – 416 Rigby
• Weight 4,2 to 4,9 kg depending on chambering

Action with solid sidebars for strength, double-scallopped for a firm wood-to- metal fit. Double trigger “Blitz”-type battery. New deep-cut Royal-style engraving motif, with a “al bulino” cape buffalo trophy on action bottom. Double parallel locking underlugs,

Barrel length 600 mm (24 in.) or 650 mm (26 in.) depending on chambering. Quarter-rib with express-style rear sight with one fixed blade and three folding blades, prepared for scope bases installation.

AAA Fancy walnut pistol grip stock with an english-style cheekpiece and an old english buttpad, hand-rubbed oil finish. Extended trigger plate with bordered, engraved trigger bow, reservoir engraved steel pistol grip cap. Comes in a molded plastic case.

• Available Calibers: 375 H & H – 375 Flanged – 470 NE – 450.400 NE – 416 Rigby
• Weight: 4,2 to 4,9 kg depending on chambering

Largely similar to the AGEX Brousse model, it has been improved by fitting sideplates and adding heavy reinforcing sidebars. New engraving throughout, signed by our Master Engraver, with royal-style deep cut foliage and chain motifs outlining the sideplates.

“Al bulino” game scenes engraved on sideplates: buffaloes and elephants, with a lion’ s head medaillon on action bottom.

AAAAA luxury walnut pistol grip stock with an english-style cheekpiece and an old english buttpad. Extended trigger plate with bordered, engraved trigger bow, reservoir engraved steel pistol grip cap. Comes in a New Prestige Chapuis Armes gun case.